一级黄色片在线自慰免费看|免费国产一级A片在线观看|国产一级A片无码免费下载

<td id="ieegi"><option id="ieegi"></option></td><td id="ieegi"><noscript id="ieegi"></noscript></td><td id="ieegi"><option id="ieegi"></option></td>
  • <table id="ieegi"><noscript id="ieegi"></noscript></table><noscript id="ieegi"></noscript>
    <noscript id="ieegi"><noscript id="ieegi"></noscript></noscript>
  • <noscript id="ieegi"><source id="ieegi"></source></noscript>
  • 廊坊互科機械裝備有限公司HUKEJIXIE
    全國咨詢熱線:15097644333
    熱門關鍵詞:
    當前位置:首頁 > 產品中心 > 蒸壓加氣混凝土生產線 >

    蒸壓加氣混凝土(ALC)生產線

    切割機組工作原理Working principle of cutting unit 當坯體的強度達到可進行切割時,加氣混凝土便開始脫模。脫模后的坯體被運送到

    全國熱線
    15097644333
    詳細信息

    設備優勢 Equipment advantages

    切割機組工作原理
    Working principle of cutting unit

     

        當坯體的強度達到可進行切割時,加氣混凝土便開始脫模。脫模后的坯體被運送到切割線上。在切割線上,加氣混凝土先經過校準、整形,而后進行水平切割和垂直切割。

        榫口、凹槽和手持孔的切割在坯體進行蒸壓前處理完成,這樣就無需摩削硬化后的加氣混凝土成品了,從而節約成產成本,這也是我們“零工藝廢料”概念的一部分。

        脫模后的坯體連同側板一起放置在切割小車上,切割小車由減速電機驅動行走,通過水平切割機完成水平切割,切割小車繼續行走至垂直切割機中間位置停止后,由小車置換裝置將側板連同坯體抬起,切割小車退回翻轉行車底下進行下一次承載脫模后的坯體,另外一部切割小車進入置換裝置底下后。置換裝置將側板連同坯體放置該切割小車上后,垂直切割動作后啟動進行垂直切割動作,切割完成后,切割小車再行走至確地行車底下,再由翻轉去底行車將坯體去底(連側板)吊至蒸養小車上,切割小車范圍原始位置進行下一個切割循環。

      When the strength of the billet reaches the point where it can be cut, the aerated concrete begins to demould. The demolded billet is transported to the cutting line. On the cutting line, aerated concrete is first calibrated and shaped, followed by horizontal and vertical cutting.

      The cutting of tenons, grooves, and handheld holes is completed before the billet is steamed, which eliminates the need to grind and harden the aerated concrete product, thereby saving production costs. This is also part of our concept of "zero process waste".

      The demolded blank body and side plate are placed on the cutting trolley, which is driven by a reduction motor and completes horizontal cutting through a horizontal cutting machine. The cutting trolley continues to move to the middle position of the vertical cutting machine and stops. The side plate and blank body are lifted by the trolley displacement device, and the cutting trolley returns to the bottom of the overturning crane to carry the demolded blank body for the next time. The other cutting trolley enters under the displacement device. After the replacement device places the side plate and the billet on the cutting trolley, the vertical cutting action is initiated after the vertical cutting action is completed. After the cutting is completed, the cutting trolley then travels to the bottom of the designated crane, and the overturned bottom removal crane lifts the billet (with the side plate) to the steam curing trolley. The original position of the cutting trolley is then used for the next cutting cycle.
    切割完成后,通過翻轉去底行車把坯體底皮和頂皮廢料去掉再吊至蒸養小車進行入釜編組。
    After the cutting is completed, the bottom skin and top skin waste of the billet are removed by flipping the bottom removal crane and then lifted to the steam curing trolley for grouping into the kettle.


     

    <td id="ieegi"><option id="ieegi"></option></td><td id="ieegi"><noscript id="ieegi"></noscript></td><td id="ieegi"><option id="ieegi"></option></td>
  • <table id="ieegi"><noscript id="ieegi"></noscript></table><noscript id="ieegi"></noscript>
    <noscript id="ieegi"><noscript id="ieegi"></noscript></noscript>
  • <noscript id="ieegi"><source id="ieegi"></source></noscript>